Transporting a metal garage can be a challenge, but with the right planning and preparation the process becomes easier. Whether it's a single-car garage, a two-car garage or one with an extra utility room, the key steps include carefully assessing the condition of the garage, dismantling the structure, securing the components, and choosing the right vehicle for transportation. This article provides a comprehensive step-by-step guide to help you through the process of transporting your metal garage, highlighting the key aspects to look out for to ensure safe and efficient transportation.
Before transporting a metal garage to a new location, it is important to properly prepare the structure for transportation. The process is quite complicated and may require the help of a professional transport company, but below are some key steps to look out for:
Garage assessment: Before you start dismantling, make a thorough assessment of the condition of the garage. Check for any damage that could hinder transportation. Any serious damage may need to be repaired before transportation.
Securing the property: Make sure the garage is completely emptied. Remove any items that may be damaged during transport or that may pose a safety hazard.
Dismantling: Your metal garage may need to be dismantled before transportation. Depending on the design, this may involve dismantling screws and rivets and removing doors and windows. Remember to label all components appropriately to make it easier to reassemble the garage later.
Securing the components: Once the garage has been dismantled, all components should be properly secured. This may include wrapping them in bubble wrap, securing them to pallets or placing them in special shipping containers.
Securing the loading area: Check that the location where the garage is to be loaded onto the vehicle is secure and accessible to the transport company. Make sure that the access road is free of obstructions and has an adequate width.
Choosing a transport company: Choose a transport company with experience in transporting this type of structure. Make sure they have adequate insurance and equipment to transport the garage safely.
Communication with the transport company: Make sure you communicate with the transport company at every stage of the process. Provide them with any information they may need, including the dimensions of the garage, its weight and details of where it will be loaded and unloaded.
Remember that transporting a metal garage is a complex task that requires proper planning and execution.
Dismantling a metal garage may be necessary to transport it, especially if the structure is large. This process requires precision and attention to ensure safety and avoid damage to the garage. Below I detail the process of dismantling a metal garage:
Preparation: Before starting dismantling, make sure the garage is completely emptied. Secure the work area by removing any obstructions from the area around the garage. Prepare the necessary tools such as spanners, screwdrivers, hammers and, depending on the structure, thread spanners.
Dismantling doors and windows: Start with the doors and windows, and carefully dismantle them. They may be fixed with screws, so you may need to use a spanner or screwdriver. After dismantling, secure the doors and windows by wrapping them in protective material to avoid damage during transport.
Dismantling the walls: Next, undo the screws or rivets connecting the individual wall panels. Starting at the top and working your way down, carefully remove each panel. Remember to hold the panels horizontally so as not to damage the sheet metal.
Removing the roof: The roof can be one of the most difficult items to remove, due to its size and location. You may need to use a ladder or scaffolding to access the roof safely. Carefully undo the screws or rivets connecting the roof to the rest of the structure and carefully remove it.
Securing the components: After dismantling, all garage components should be properly secured. It is advisable to wrap them in bubble wrap or other protective film and then carefully place them on a pallet or in a shipping container.
Remember that safety is paramount when dismantling a metal garage. Make sure you have the right tools and equipment, as well as help if necessary. Above all, if you are unsure of your skills, consult a professional dismantling service or transport company.
Transporting a metal garage requires a suitable vehicle, depending on the size of the garage and the specifics of the route. Transport companies use different types of vehicles to transport these structures. Here are some of them:
Low-profile trucks: These vehicles are often used to transport metal garages due to their low profile and large loading area. The low profile allows the garage to be loaded and unloaded easily, while the large loading area allows the structure to be transported safely.
HDS platforms (hydraulic truck crane): HDS platform trucks are equipped with a crane that makes it easy to load and unload a metal garage. The crane can lift the garage directly from the ground and place it on the truck platform.
Low-loader trailers: these vehicles are ideal for transporting larger structures such as metal garages. Their low height makes them stable when driving and their large size allows larger structures to be transported.
Trailers with movable floor: trailers with a movable floor allow the garage to be easily loaded and unloaded without the need for additional equipment. The floor of the semi-trailer can be moved, allowing the garage to be easily moved into position.
Choosing the right vehicle to transport a metal garage depends on a number of factors, including the size and weight of the garage, the distance to be travelled and the specifics of the journey. It is important that the transport company has access to the right equipment and vehicles to ensure the garage is transported safely to its new location.
Metal garages are a popular choice for many people due to their versatility, durability and relatively low cost. Below are the different types of metal garages:
Single-car garages: These are the simplest metal garages, designed for one car. The standard dimensions of such a garage are approximately 3.5 m wide, 5m long and 2.5 m high, although this can vary from manufacturer to manufacturer. The average weight of such a garage is around 400-500 kg.
Two-car garages: these are larger garages that can accommodate two cars. The standard dimensions of such a garage are approximately 6m wide, 5m long and 2.5 m high. The average weight of such a garage is around 800-1000 kg.
Garages with utility room: These garages have an additional room that can be used as storage or a workshop. The dimensions and weight can vary considerably depending on the size of the extra room, but in general they are heavier and larger than standard single or double garages.
Metal garages with sheds: These garages combine a garage structure with an additional canopy that can be used as storage for wood, garden tools or other items. Dimensions and weight depend on the size of the shed and garage, but they are usually heavier and larger than standard garages.
Please note that these dimensions and weights are only averages and may vary depending on the manufacturer and specification of the specific garage.
EN
